<menuitem id="1zrpd"><video id="1zrpd"><menuitem id="1zrpd"></menuitem></video></menuitem>
<ins id="1zrpd"><span id="1zrpd"><cite id="1zrpd"></cite></span></ins>
<ins id="1zrpd"></ins>
<ins id="1zrpd"></ins>
<cite id="1zrpd"></cite>
玻璃布固化烘干爐
本文作者:石家莊鵬遠自動化工程技術有限公司      發布時間:2019-07-26
傳動系統經過燜燒爐處理過的玻璃纖維布耐磨性差,其表面有很強的親水性,易于吸附水分,此時經過偶聯劑浸漬后,進入固化烘干爐經過一定的溫度,一定的時間烘干生產出來的玻璃纖維布質地柔軟,改善表面質量,增加強度,提高使用性能,滿足了用戶的需要。
 
Solidification drying oven (surface treatment production line)
The abrasion resistance of the glass fiber cloth which is treated by burning furnace is poor, its surface has a strong hydrophilic and it is easy to adsorb moisture. The glass fiber cloth is soft after it has been drying at a certain temperature during a certain time in the solidification drying oven. The drying improves the surface’s quality, increases strength and improves the performance.
技術性能:
①爐子用途:玻璃纖維布浸漬烘干
②加熱能力:900-4800m/h
③工作溫度:~260℃
④傳動運行速度:10-80m/min(工藝速度90m/min)
⑤玻璃布幅寬:1.27m
⑥能源:電、天然氣、煤氣、油、蒸汽(根據用戶能源選擇)
 
Technical characteristic:
  • The use of the furnace: Immersion and drying glass cloth
  • Heating efficiency:900-4800m/h
  • Working temperature: ~260 ℃
  • Transmission speed: 10 - 80 m/min (process speed 90 m/min)
  • Glass cloth width: 1.27 m
  • Energy: electricity, natural gas, gas, oil, steam (energy according to user's choice)
 
設備特點:
結構簡單,三層鋼結構平臺,維護方便;
固化烘干爐為一座爐子,體積小,占地面積??;
節約能源30-40%;
爐內熱風循環,變頻調速,強制換熱,提高熱交換效率;
爐子分三區控制溫度;
排濕方式:爐頂集中射流排濕和自然排濕相結合,配備調風閥和調風板;
爐體內壁采用不銹鋼板。
 
Machine Features
Simple structure, three layers steel structure platform, convenient maintenance.
A stove is a curing and drying furnace, its volume is small, it covers a small area.
It saves energy of 30-40%.
Hot air circles inside the furnace, frequency control of motor speed, forced heat transfer and improve the efficiency of heat exchange.
The stove points three control temperature.
Platoon is wet way: top concentrated natural platoon is wet, the combination of jet platoon is wet and equipped with adjustable air valve and air board.
The furnace lining is made of stainless steel plate
傳動系統包括開卷、接頭、前牽引、除塵、后牽引、張力測試、收卷等。表面處理生產線系統還包括浸漬機組。
 
 
Transmission system
Transmission system consists of open-book, joint, former traction, dust removal, back traction, tension test, winding, etc. Surface treatment production line system also includes impregnation unit.
設備特點:
表面處理生產線及預處理線傳動系統采用交流變頻調速技術;
PLC控制技術;
專用張力控制技術,可以實現卷取錐度控制及傳動零速張力,保證玻璃布無褶皺、纏繞、卷取整齊美觀;
機組高效節能,操作方便,安全平穩;
與直流傳動相比可實現無漂移、
傳動速度15-45m/min;
收卷自動糾偏免維護;,卷取整齊美觀。
 
Machine Features
Surface treatment production line and pretreatment line transmission system adopt ac frequency conversion speed regulation technology;
PLC control technology
Special tension control technology, it can realize coiling taper tension control and transmission zero velocity, it ensures the glass cloth is no fold, winding and clean;
The unit is high efficiency and energy saving, convenient operation, stable security;
Compared with the dc transmission it realizes no-drift and free maintenance;
The transmission speed is 15 - 45 m/min;
Winding corrects automatically, coiling is tidy and beautiful.
 
電話:0311-83803118 傳真:0311-87668075 公司總部:石家莊市橋西區槐安西路與西二環南路交叉口西行一百米路南樂橙商務廣場B座1716。 郵編:050081
版權所有:石家莊鵬遠自動化工程技術有限公司 備案:冀ICP備13020378號-1 技術支持:【藍點網絡

抓住我的双乳咬我奶头视频,亚洲中文字幕无码专区,日本vps私人大片,18禁夜色福利院在线播放